Sunfire HRS-SAT4 User Manual download pdf (Page 12)

User's Manual

12

5. Pass the large screw through the

hole in the rear side of the column,

and into the threaded hole in the

rear of the loudspeaker. Be careful

not to pinch or cut the speaker

wires with the screw, or jam the

wires between the loudspeaker

and the top of the column. Tighten

the screw until the loudspeaker is

secured ush with the column.

6. Move the loudspeaker/stand as

-

sembly into position in your room.

Make sure that the speaker wires

pass through the slots in the base

when you set it down.

7. Test that the loudspeaker is work

-

ing correctly. If your home theater

processor or receiver has a test

tone system, try sending test tones

through all of the loudspeakers in

your system, to check for correct

operation.

Screw

Screw head

Wires

Slots

Screw

HRS-SAT4 mounted to the stand

1 2 ... 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments